Zoom 4530 Series User Manual Download Page 18

Page: 18 / 101

Configuring PPPoE

The page shown below only appears if you select the

PPPoE

button on the

Select

WAN Type

menu. Otherwise skip this section.

•

PPPoE Account

This is the PPPoE username supplied by your service provider.

•

PPPoE Password

This is PPPoE password supplied by your service provider.

•

Primary DNS

This is the Domain Name System (DNS) server's IP address. Your service
provider supplies this address, if needed. Most users should not need to
enter a DNS value.

•

Secondary DNS

This is the IP address of an alternate Domain Name System (DNS) server.
Your service provider supplies this address, if needed.

•

Service Name

This is the name assigned by your service provider to identify your service.
The

Service Name

is optional.

•

Assigned IP Address

This is the optional IP address assigned by your service provider. The

Assigned IP Address

is optional.

18 3G+ Modem/Router with Wireless-N and Phone Port User Manual

Summary of Contents for 4530 Series






































































































Search results

Summary of Contents for 4530 Series

Reviews:

Related manuals for 4530 Series

Brands by name

Popular brands

Zoom 4530 Series, User Manual

Search results

Summary of Contents for 4530 Series

Reviews:

Related manuals for 4530 Series

Brands by name

Popular brands