Zoom 4530 Series, User Manual

Page: 50 / 101

Modem/Router by using this text message:
<security key> status
The Modem/Router responds with the WAN IP, Carrier Name, the type of
network (HSPA+, HSUPA, WCDMA, GPRS), and the amount of time your
Modem/Router’s Internet connection has been active.
Connect
Click
Enable
if you want to be able to remotely ask your Modem/Router to
make an Internet connection by using this text message:
<security key> connect
If your Internet connection is down, you can send the Connect text message
to re-establish the connection. If your Internet connection is up, the Connect
text message won’t affect the Internet connection.
Disconnect
Click
Enable
if you want to be able to remotely force your Modem/Router to
disconnect from the Internet by using this text message:.
<security key> disconnect
If the Modem/Router receives a Disconnect message, it will
not
try to
re-connect if the WAN is set to auto-reconnect.
Reconnect
Click
Enable
if you want to be able to remotely reconnect your Internet
connection by using this text message:
<security key> reconnect
Reconnect will disconnect the current Internet connection and then start a
new connection.
Reboot
Click
Enable
if you want to be able to reboot your Modem/Router remotely
by using this text message:
<security key> reboot
Notification Settings
These settings allow you to select which notifications get sent out to phone numbers on your
Access Control list, a list of phone numbers for people allowed to send or receive text
messages relating to your Modem/Router. These messages are only sent out if you have
Access Control
enabled for at least one phone number that’s set up for notification. See
Access Control List below for more information.
WAN Link Up
Click
Enable
if you want the Modem/Router to send a notification message
to users in the access control list when an Internet connection is first
established.
50 3G+ Modem/Router with Wireless-N and Phone Port User Manual