Zip Loaden plus, Owner'S Manual

Page: 16 / 89

ZLP MANAGER: OWNER’S MANUAL
16/89
2.2.3.1 REGISTRING THE UNITS' ADDRESSES
1. Choose "Ethernet" as the functioning mode:
2. Press the "Insert" key:
3. Set the machine code and IP address assigned to the ZLP unit's Ethernet board.
Press OK to confirm.
It's useful to choose a Machine Code that reminds you of the IP address assigned to the unit itself.
4. Repeat steps 1 to 3 for the other units.
5. To alter or cancel a unit, press the keys "Edit" or "Delete".
2.2.3.2 SETTING THE SECURITY CODES (Pass Code/Security Code)
Programme the Pass and Security codes with the same values set on the ZLP unit (see the ZLP
Owner’s Manual ‘Programming/Codes’).