Zip Loaden plus, Owner'S Manual

Page: 15 / 89

ZLP MANAGER: OWNER’S MANUAL
15/89
3. Tap in “ping XXXXX” and press enter (XXXXX is the IP address assigned to the Ethernet
board).
4. If everything has been configured correctly a screen page like the one shown in the
following figure appears, where the percentage of lost packages should be 0:
5.
If, instead, there is an output like the one shown in the following figure, where the percentage
of lost packages is 100%, you must recheck the Ethernet baord configuration parameters.
2.2.3 ZLP MANAGER SOFTWARE SETTINGS
The following procedure must be followed to enable communication via Ethernet:
1. Registration of the units' addresses;
2. Setting the security codes (Pass Code/Security Code);
3. Choosing the functioning mode (Single/Multiple).