OPERATION AND MAINTENANCE MANUAL
Semi-automatic BOV Crimping Machine Z-2312
A0310.01.2312.905.1.EN
Page 11/33
Standard design of the device assumes injection of compressed air into containers; in case of
injection of other propellant it’s necessary to provide gas into propellant connection
Factory-made new machines may contain traces of oil. Before main
exploitation begins it is advised to gasify several containers using propellant
to flush dispensing wires. Containers filled in this way have to be removed
from further production. The same applies in case of changing dispensed gas.
3.3.
Storage
During the long downtime in production, the machine must be stored in a covered place, free from
external moisture and atmospheric factors such as rain and snow. Also, avoid storage in places of
high insolation or standing next to heat sources. The air temperature in the place of storage shall
not be less than 7 ° C. If the storage period is longer than 6 months, before restarting the machine,
check the technical condition of equipment and make any necessary repairs.
Summary of Contents for Z-2312
Page 36: ...PNEUMATIC DIAGRAMS...
Page 38: ...SPARE PARTS LIST WITH TECHNICAL DRAWINGS...
Page 44: ...ELECTRIC DIAGRAMS...
