Zigler Z-2312, Instruction Manual

Page: 8 / 49

OPERATION AND MAINTENANCE MANUAL
Semi-automatic BOV Crimping Machine Z-2312
A0310.01.2312.905.1.EN Page 8/33
NOTE: This machine has been designed and constructed with a view to use by
operators who are not disabled. For use by persons with disabilities, the
device should be adjusted accordingly after prior consultation with the
manufacturer.
2.3. Use according to the purpose
The purpose of the machine was described in chapter 1.1. Moreover, the term „use according to
the purpose”, encompasses:
Following the technical parameters specified in this Operation and Maintenance Manual,
Using the standard equipment supplied with the device,
Following the operation manual, taking into consideration the information and guidelines
set forth in it.
The Producer disclaims responsibility for any damage which may result from
operating this device in a manner violating the operation manual
2.4. Conditions of operating the machine safely
1. Order at a work station should be maintained. Disorder at a work station may easily result in
an accident.
2. Work-stations should be properly lit.
3. It is not advisable that any unauthorized persons stay near the machine while it is being
operated.
4. Excessive accumulation of materials and items not required by the process of production should
be avoided.
5. It is forbidden to perform the regulation of the device in order to increase its capacity above
the norm determined in technical data, as it could result in disturbances and damage to
separate sub-assemblies.
6. Follow the recommendations concerning the lubrication and maintenance of the separate
elements of the device and the manner of replacing instrumentation.
7. Follow the periodical check-up times of the entire device.
8. Before starting the machine, control the condition of compressed air pipes,
and in case of noticing damage, replace any that requires it with the new one.