![background image](http://html1.mh-extra.com/html/zetron/15p/15p_operating-manual_3536660062.webp)
Section 5. Programming
5-14
2805 Format
For 2805/1500-Hz pulse paging format, select the paging format prompt “2805”, and then
press ENTER. Table 5.
PROGRAMMING-10
shows and explains the prompts for this
format.
Table 5. PROGRAMMING-10 2805 Format Prompts
Major
Prompt
Conditional
Prompt
Explanation
tALH =
Enables talk time during the page, the amount of Talk time has
been set in "SYStEM" programming. 0 = Talk disable; 1 = enable.
1500 =
Selects tone used for pulse generation. 0 = use 2805 Hz tone,
and 1 = use 1500 Hz tone
dGtS =
Select the number of digits to be sent per page. A value between
1 and 8 is acceptable.
StrP =
The number of strapped digits for this format. An entry of 0 to 7 is
valid, however, the encoder will not accept a value greater than
“dGtS - 1".
StP(n)=
If the number of strapped digits programmed is > 0, this prompt
requests the digit desired for the strap position indicated. So that
StP1= is always the first digit sent, StP2= is the next and so on.