Section 7. Quick Reference
7-18
PROGRAMMING FUNCTIONS LOG
Use this Programming Functions Log to record the settings programmed into your encoder.
This log will be a handy reference should changes be required. Copy these pages as necessary
to record all leading digits programmed.
Please Note:
Throughout the following lists, 0 = No
or Off, 1 = Yes or On
SYStEM
System wide parameters.
Prompt and
Default
Programmed
Value
Description
tLH= 0
Talk time (seconds)
binP=0
Logic “0 “ sent as 0/1
diGP=0
Digital mode select polarity
APAG=0
Autopaging
On/Off
SCrL=0
Autoscroll On/Off
cont=0
Continuous transmit On/Off
Sld=0
Station ID On/Off
ld
(ID string, 10 characters max)
2 tonE
___ = Leading digit for 100/1000 call Two-Tone
Main
Prompt
Dependent
Prompt
Programmed
Value
Description
tALH =
Talk enable Yes/No
COdE =
Use 1000 call Code Plan? Yes/No
GP1=
100 call group 1 select
GP2=
100 call group 2 select
PLN=
Select 1000 call code plan
1St =
First Tone timing #/100ms
GAP =
Gap timing #/100ms
2nd =
Second Tone timing #/100ms
diAG =
Diagonal tone Yes/No
dur =
Group Tone duration #/100ms
742 =
Diagonal tone freq. (Hz), default = 742
A b =
Diagonal tone placement A/B tones
