Section 5. Programming
5-11
DTMF Format
For DTMF encoding, select the paging format prompt “dtn.F”, and then press ENTER. Table
5.
PROGRAMMING-7
shows and explains the prompts for this format. The maximum
length for DTMF paging is eight digits.
Table 5. PROGRAMMING-7 DTMF Format Prompts
Major
Prompt
Conditional
Prompt
Explanation
tALH =
0 = Talk disable; 1 = enable.
dur =
Tone duration (timing). A two digit entry specifying the number of
10ms units of time for each tone. (tone time X 10ms)
GAP =
The gap timing (time between tones). (Gap time X 10ms)
dGtS =
Number of DTMF digits. A valid entry is from 1 to 8 digits may be
sent per page.
StrP =
Number of digits strapped within the encoder. A valid response is
from 0 to 7 digits, however, the encoder will not accept a value
greater than “dGtS” - 1 for this entry.
StP(n)=
If the number of strapped digits programmed is > 0, this prompt
requests the digit desired for the strap number. “StP1=“ is always
the first digit sent, “StP2=“ is the next and so on.
