Section 5. Programming
5-20
Finally, the steps in Table 5-17 show how to save the two capcodes that were created in this
example to the nonvolatile memory.
Table 5-17 Saving the Custom Two-Tone Programming
Display Keystrokes
Explanation
C
CLEAR
Press the CLEAR key to exit the Custom Two-Tone format.
diGt =0
CLEAR
Press the CLEAR key again to exit programming mode.
SAVE y
CLEAR
You are given the option to save or not.
SAVE n
CLEAR
Notice that pressing any key other than ENTER will toggle between
SAVE y and SAVE n.
SAVE y
ENTER
Pressing ENTER with SAVE y in the display will save any changes
that were made during programming to nonvolatile memory.
SAVinG
The display will flash SAVinG for a few seconds then display the
page mode prompt.
-
Ready to page.