Zero SR/S, Service Manual

Page: 7 / 290

General Information
2-1
General Information
How To Use This Manual
General
To assist in the use of this Manual, it is divided into
numbered sections (shown on the previous page).
Each section starts with a contents page listing the
service procedures covered within that section.
Each section is numbered from page 1, and the
page number is shown at the bottom of each page.
References will be made from within a service
procedure to other procedures that should be
carried out as part of the main procedure.
The individual actions of the service procedures
must be followed in the sequence in which they
appear. Annotation numbers on the illustrations
refer to the relevant numbered action after the
illustration.
For reference purposes, an illustration number is
shown in the bottom left hand corner of each
illustration.
Important Information Types
The following words are used within this manual to
call your attention to specific types of information.
WARNING! An action or information which must
be followed precisely to avoid the possibility of
injury.
CAUTION: Calls attention action or information
which must be followed to avoid damage to
components.
NOTICE: Information that must be performed
before starting the repair procedure.
Note: Gives helpful information.
Dimensions
The dimensions quoted are to design engineering
specification. Service limits are included where
applicable.
Terminology
Left side of motorcycle.
Right side of motorcycle.