Zenoah GZ381, Operator'S Manual

Page: 18 / 200

Contents
Introduction.................................................................18
Safety........................................................................... 19
Assembly.....................................................................24
Operation.....................................................................24
Maintenance................................................................ 30
Troubleshooting......................................................... 36
Transportation and storage....................................... 37
Technical data.............................................................38
Accessories.................................................................39
EC Declaration of Conformity....................................41
Introduction
Product description
Zenoah GZ381 is a chainsaw model with a fuel engine.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Intended use
This product is intended for sawing in wood.
Note: National regulations can set limit to the operation
of the product.
Product overview GZ381
(Fig. 1)
1. Cylinder cover
2. Air purge
3. Combined start and stop switch
4. Rear handle
5. Information and warning decal
6. Fuel tank
7. Adjuster screws carburettor
8. Starter handle
9. Starter
10. Chain oil tank
11. Product and serial number plate
12. Front handle
13. Chain brake and front hand guard
14. Muffler
15. Saw chain
16. Bar tip sprocket
17. Guide bar
18. Spiked bumper
19. Chain catcher
20. Chain tensioning screw
21. Clutch cover
22. Right hand guard
23. Throttle trigger
24. Throttle trigger lockout
25. Guide bar cover
26. Combination spanner
27. Operator´s manual
Symbols on the product
(Fig. 2) Careless or incorrect use of this product can
result in serious or fatal injury to the operator
or others.
(Fig. 3) Read the operator's manual carefully and
make sure you understand the instructions
before you use this product.
(Fig. 4) Always wear approved protective helmet,
approved hearing protection and protective
goggles or a visor.
(Fig. 5) This product is in accordance with
applicable EC Directives.
(Fig. 6) Noise emission to the environment
according to the EC Directive. The product's
emission is specified in the Technical data
chapter and on the label.
(Fig. 7) Chain brake, activated (right). Chain brake,
not activated (left).
(Fig. 8) Choke
(Fig. 9) Air purge.
(Fig. 10) Refuelling.
(Fig. 11) Chain oil fill.
(Fig. 12) The rating plate showing serial number.
yyyy is the production year, ww is the pro-
duction week.
Note: Other symbols/decals on the product refer to
certification requirements for certain markets.
18 272 - 008 -