Touch-MyDesign Plus
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com/
43
1-Bit Object
: when marked, it will be possible to switch the mode by writing to a
binary object (“
[General] LEDs: Brightness Mode
”). A specific drop-down list
will show up to select which value should trigger which mode (“0 = Normal; 1 =
Night” or “0 = Night; 1 = Normal”).
Scene Object
: when marked, it will be possible to switch the mode by writing a
certain scene value to “
[General] Scene: Receive
”. Two specific textboxes will
show up to enter what scenes (1 through 64) will trigger each mode.
Figure 29
General - LED Brightness: Night Mode.
