Touch-MyDesign Plus
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com/
29
Figure 20
Individual Button – Scene.
Action
: sets whether the value to be sent to the KNX bus (through “
[General]
Scene: Send
”) when the user touches the button will always be a scene run
request (“Run Scene”) or –depending on the length of button press– a scene
run or save request (“Run (Short Press) + Save (3s Press) Scene”).
Scene Number
: number of the scene (1 – 64) to be sent to the bus, both in the
case of the run requests and the save requests.
LED Illumination Control
: analogous to the homonymous parameter for all the
above functions (see previous pages). The options in this case are “Regular”,
and “Dedicated Object”.
Scaling Constant
/
Counter Constant
/
Float Constant
Figure 21
Individual Button - Scaling Constant.
Object Value
: sets the value to be sent to the KNX bus when the user touches
the button. The available range and the object through which the value is sent
depends for each case:
