Touch-MyDesign Plus
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com/
8
2
CONFIGURATION
2.1
GENERAL CONFIGURATION
To make the device perform the desired functions, several options need to be
parameterised, either related to its
general behaviour
(horizontal/vertical orientation,
lock procedure of the touch panel, sounds, welcome back object, LED brightness
levels…) or
specific for each button
(function to be performed, behaviour of the
corresponding LED, etc.).
On the other hand, Touch-MyDesign Plus features two opto-coupled inputs, each of
which may be independently configured as a
switch/sensor
, a
push-button
, a
motion
detector
, or a
temperature probe
, so that external accessories can be connected to
the device. In the particular case of an external temperature probe (such as model
ZN1AC-NTC68
from Zennio), it will be possible to use it with independence of the built-
in temperature sensor of the device, which implements its own communication objects
and can be enabled and disabled in parameters.
ETS PARAMETERISATION
Figure 4
General Configuration.
