Touch-MyDesign Plus
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com/
16
Moreover, it is possible (in parameters) to make the “
state-dependent
” and
“
state-dependent (both LEDs)
” LED illumination modes (see section
¡Error!
No se encuentra el origen de la referencia.
for details) depend on either one
object or the other. However, if “
LED Illumination Control (All Buttons)
”
(section 2.1) has been set to “state-dependent (where available)” only the short
press object will be considered.
ETS PARAMETERISATION
When a button pair has been configured to work as a joint control, a specific tab (“
Pair
X
”) becomes available under “Main Buttons” in the tree on the left.
Figure 9
Main Buttons - Pair A.
Note
:
the INFO textboxes are functionless (they simply bring the option to add a
description to each button of the project) and can be hidden if desired. See section 2.1
.
The main parameter that needs to be configured is:
Function
: sets the desired function for the button pair: “Switch”, “Dimmer”,
“Shutter” or “Two Objects (Short Press / Long Press)”.
Depending on the function, some more parameters are shown, as described next.
Please note that in the next pages the general notation “
[X]
” is used for the name of the
communication objects, as “X” depends on the button pair (A, B, etc.).
Switch
Figure 10
Pair Buttons – Switch.
