Touch-MyDesign Plus
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com/
39
Note
:
Regarding the LEDs, it is interesting to distinguish the following cases
:
Button Pair configured as “Disabled”
:
the two LEDs will be functionless (off).
Button Pair Configured as “Individual”, but buttons themselves disabled: the
LEDs will still be functionless (as above).
Button Pair Configured as “Individual”, and buttons configured as “Disabled”:
the buttons will remain functionless, while the behaviour of the LEDs will be
configurable (being also possible to leave them off), as shown in the table.
Disabled
Regular
State-dep.
State-dep.
(both LEDs)
Dedicated
object
PAIR
(Main
Buttons)
Switch
Dimmer
Shutter
Two Objects
INDIVIDUAL
(Main or
Additional
Buttons)
Disabled
Binary
Hold & Rel.
Two Objects
Scene
Constants
Dimmer
Shutter
JOINT
(Additional
Buttons)
Setpoint
Unsigned
Scaling
Table 1
Functions vs. LED Illumination Options.
Although the behaviour of the LEDs can be configured independently for each control
(see section
2.1), it is also possible to define a
general behaviour for all of them
,
thus not being then necessary to configure the same option multiple times. In case of
opting for a general configuration, the options are:
