EN 20_070_0009I v1.5
Decommissioning
43
If you switch off the device while the Standby button is still in
operation (
3
, Fig. 6), the program will be ended automatically first
and the device will be set to Standby mode. Wait to switch off the
power switch (
6
, Fig. 9), unplug the power plug or switch off the
main switch on the building installation until the blue light beside
the Standby switch has gone out.
If you switch off the device using the power switch, pull out the
power plug or activate the main switch on the building installation
during ongoing operation, the program cannot be ended, and the
operating system cannot be properly shut down. This may result in
the loss of saved data and/or defects in the device control
software. This does not result in any hazards to customers or users.
