Zeiss i.Profiler plus Instructions For Use Manual Download Page 37

Page: 37 / 66

Installation

EN 20_070_0009I v1.5

Connect NAS device via an existing network

●

When the i.Profiler

plus

and NAS device are switched off, connect the NAS

device to the practice network (LAN) in which the i.Profiler

plus

is located

using a network cable. Complete information on installing the NAS
device is provided in the instructions enclosed with the NAS device.

Observe the safety information and requirements for cable

length and type.

●

Switch on the NAS device and wait until initialization is complete before

switching on the i.Profiler

plus

. Often, a light on the front of the NAS

device changes color to indicate that initialization is complete. Further

information is provided in the manufacturer's operating instructions.

●

Switch on the i.Profiler

plus

. After starting the device, click the

Close

application

button in the

Power down

window and switch to the

Microsoft Windows desktop (Administrator rights required). It is possible

that an indicator of the LAN connection may be displayed on the taskbar

at the bottom right if there is a connection to a NAS device. Ignore this

notification temporarily.

●

Open Windows Explorer. In the

Address

field, enter the characters “\\”

and then the IP address or name of the NAS device. Confirm by

pressing

Enter

. The released directories on the NAS device are

displayed.

●

Select an existing folder or create a new folder where the i.Profiler

plus

data should be saved.

●

Open the menu option

Tools

in the menu bar. Select the

Map

Network Drive…

The

Map Network Drive

window appears.

●

Select any drive letter in the

Drive

field.

●

Press the

Browse...

Button, and the

Browse for Folder

window will

open. Select the path to the folder in which the data should be saved. You

can also enter the path directly in the

Folder

field. Select

Reconnect at

logon

●

Confirm the entries by pressing

Finish

●

It may be necessary to enter the username and password for the user

account created on the NAS device once again.

●

Double click the program icon

Save Configurations

on the Windows

desktop to save the completed configurations. The device will then

restart.



Summary of Contents for i.Profiler plus



































































Search results

Summary of Contents for i.Profiler plus

Reviews:

Related manuals for i.Profiler plus

Brands by name

Popular brands

Zeiss i.Profiler plus, Instructions For Use Manual

Search results

Summary of Contents for i.Profiler plus

Reviews:

Related manuals for i.Profiler plus

Brands by name

Popular brands