Zeiss Humphrey Matrix 800, User Manual

Page: 18 / 158

Introduction
Humphrey Matrix User Manual 2660021138935 Rev. F 2015-11
1-12
• Never position the Matrix in direct sunlight or near a direct source of heat.
• Never position the Matrix in a dusty location.
• Never attempt to change any of the batteries in the system. Attempting to change a
battery can cause damage and loss of data.
Product Compliance
Complies with 93/42/EEC Medical Device Directive.
75 +
OR
Complies with US and Canadian medical electrical system safety requirements.
User Changes to Software or Hardware
The Matrix is a medical device. The software and hardware have been designed in
accordance with U.S., European and other international medical device standards
designed to protect clinicians, users and patients from potential harm caused by
mechanical, diagnostic or therapeutic failures.
WARNING: Unauthorized modification of Matrix software or hardware
(including peripherals) can jeopardize the safety of operators and
patients, the performance of the instrument, and the integrity of patient
data; it also voids the instrument warranty.
CAUTION: It is possible that Matrix functionality may be adversely affected by the
presence, installation, or use of third party software on the same computer. The
user, and not Carl Zeiss Meditec, assumes all risks associated with third party
software.
Protection of Patient Health Information
Note: Health care providers have responsibility for the protection of patient health
information (PHI), both hardcopy and electronic. To protect patient confidentiality of your
exported electronic data, the use of encryption is recommended and is the responsibility of
the user.
Note: To protect patient confidentiality of your electronic Matrix data, the Matrix software
is equipped with a built-in, non-configurable screen saver (blank screen) which activates
after 15 minutes of idle use. When a key is depressed or the trackpad is touched, the screen
saver is deactivated and the main menu appears.