Zeiss Humphrey Matrix 800, User Manual

Page: 60 / 158

Patient Testing
Humphrey Matrix User Manual 2660021138935 Rev. F 2015-11
5-8
the DICOM system to edit patient information on the instrument.If you are using a
DICOM system, you should only change the Patient ID, Patient Name, or Date of Birth on
the DICOM system, and not on the Matrix, to avoid patient conflicts.
Select the desired patient by clicking on its row to highlight it, and then select the Run Test
button to open the T
ESTING
Screen ( Figure 5-8 ). Alternatively, you may double-click
anywhere in the patient’s row to start testing.
Add New Patient
Figure 5-6 Enter New Patient Screen
By selecting Local Database from the Source drop-down menu, a new patient can be
added to the local database using the Add Patient button. When selecting Add Patient, the
E
NTER
N
EW
P
ATIENT
Screen appears ( Figure 5-6 ). Input the required patient data. Note
however, the instrument requires the following minimum set of data:
• DOB and First Name and Last Name
or
• DOB and Patient ID
Enter the Date of Birth (DOB) in the format specified in S
YSTEM
S
ETTINGS
(F5). MM-DD-YYYY
is the system default format for date (i.e., 12-25-1919 for December 25, 1919).