Zeiss Humphrey Matrix 800, User Manual

Page: 105 / 158

Humphrey Matrix User Manual 2660021138935 Rev. F 2015-11
Networking Configuration 8-15
Add a Network Computer
You need to add at least one computer or file server on your network for the Matrix to back
up or export to. A network computer is also needed for setting up shared printers.
1. Select Add to add a networked computer. The Add a Networked Computer
dialog appears ( Figure 8-13 ).
Figure 8-13 Add a Networked Computer Dialog
2. Enter the Computer Name or IP address of the computer. If the computer requires a
secure login, enter the User name and Password for the computer. Select Anonymous
login if you can log in as a guest—guest is automatically entered for the User name
and the password is blank.
Note: You may use a simple name for the Computer Name or IP , or you may need to
use a fully-qualified computer name, such as mycomputer.mycompany.com, depending
upon your network configuration.
Note: In a Domain environment, the User name should specify Domain name\user name.
For example: env\joesmith, where env is the domain name and joesmith is the user name.
Note: See your IT, System, or DICOM network administrator for help in entering correct
configuration information.
3. Select OK to add the computer to the Available Shares list. You can add/remove
computers to the list as needed. Select Remove to remove a computer from the list.