Axioskop 2 FS
plus
OPERATION
Axioskop 2 FS
MOT
Operation and function controls
Carl Zeiss
B 40-076 e 02/01
3-9
Luminous-field diaphragm
−
Wheel (3-5/
2
) for the continuous setting of the
luminous-field diaphragm (transmitted light).
−
Additional mount (3-5/
1
) for filters with
diameter d = 32 mm.
Drive for condenser height adjustment
−
Height adjustment of the condenser to set
KÖHLER illumination.
On / Off switch
−
Position 0 = power unit switched off
−
Position I = power unit switched on
Control for light intensity
−
Controls the DC supply of the halogen
illuminator in the 3 ... 12 V range. Display of
the existing operating voltage at the scale of
the halogen illuminator.
Binocular ergotube 6-25°/23
The binocular ergotube 6-25° /23 allows the
viewing angle to be changed continuously in the
range between 6° and 25° by swivelling the
binocular component.
−
To set the most convenient viewing angle,
swivel the binocular component (3-6/
1
)
upwards or downwards.
−
The viewing height can be changed by turning
the entire binocular component around 360°
(3-8).
−
The interpupillary distance can be changed by
separate adjustment of the two eyepiece tubes.
Fig. 3-5
Luminous-field diaphragm
Fig. 3-6
Binocular ergotube
Summary of Contents for Axioskop 2 FS plus
Page 1: ...Operating Manual Axioskop 2 FS plus FS MOT Research Microscope...
Page 14: ...INTRODUCTION Axioskop 2 FS plus Carl Zeiss Axioskop 2 FS MOT 0 14 B 40 076 e 02 01...
Page 110: ...OPERATION Axioskop 2 FS plus Carl Zeiss Axioskop 2 FS MOT 3 40 B 40 076 e 02 01...
Page 122: ...ANNEX Axioskop 2 FS plus Carl Zeiss Axioskop 2 FS MOT A 2 B 40 076 e 02 01...
