OPERATION
Axioskop 2 FS
plus
Carl Zeiss
Operation and function controls
Axioskop 2 FS
MOT
3-8
B 40-076 e 02/01
Mechanical stage with universal mounting
frame
−
Mounting, positioning and fixation of the
specimens on the universal mounting frame
(3-3/
1
).
Pushrod for objective change
−
Sliding and lowering function for objective
change via pushrod (3-4/
1
) in single-hand
operation.
−
Lifting range for objective change: 9 mm above
work position.
•
Turn the pushrod to the right and remove front
(3-4/
2
) or rear (3-4/
3
) objective from the work
position.
•
Pull or push the pushrod (3-4/
1
) and bring front
or rear objective into the beam path.
•
Turn the pushrod to the left to lower the
objective into the work position.
Reflector turret
−
Accepts a maximum of five technique modules,
such as the FL P&C reflector module and the
shutter plate for incident light, and the Optovar
module and analyzer module for transmitted
light.
−
Fast change of technique modules by turning
the knurled ring of the reflector turret.
Fig. 3-3
Mechanical stage with universal
mounting frame
Fig. 3-4
Objective slider
Summary of Contents for Axioskop 2 FS plus
Page 1: ...Operating Manual Axioskop 2 FS plus FS MOT Research Microscope...
Page 14: ...INTRODUCTION Axioskop 2 FS plus Carl Zeiss Axioskop 2 FS MOT 0 14 B 40 076 e 02 01...
Page 110: ...OPERATION Axioskop 2 FS plus Carl Zeiss Axioskop 2 FS MOT 3 40 B 40 076 e 02 01...
Page 122: ...ANNEX Axioskop 2 FS plus Carl Zeiss Axioskop 2 FS MOT A 2 B 40 076 e 02 01...
