OPERATION
Axioskop 2 FS
plus
Carl Zeiss
Documentation
Axioskop 2 FS
MOT
3-32
B 40-076 e 02/01
3.4
Documentation
3.4.1
Attachment of photomicrography equipment
The Axioskop 2 FS
plus
/ Axioskop 2 FS
MOT
equipped with a binocular phototube (3-24/
5
) can be
switched from observation to photomicrography
(pushrod pulled out) using the pushrod (3-24/
7
). The
special T2 adapter 2.5x and other T2 adapters permit commercially available 35 mm SLR cameras (SLR -
Single Lens Reflex) and special microscope cameras (e.g. MC 80
DX
or MC 200
CHIP
from Carl Zeiss) to be
attached to the 60 mm interface camera port of the binocular phototube. For use of photomicrography
equipment please see the relevant operating instructions.
(1)
Attachment of a SLR camera,
e.g. CONTAX 167 MT
•
Screw T2 adapter (416010-0000-000, 3-24/
3
)
suitable for the used camera on the 2.5x
connector for T2 (456005-0000-000, 3-24/
4
).
•
Attach camera (416181-0000-000, 3-24/
2
) and,
if required, cable release (416167-0000-000,
3-24/
1
).
•
Remove dust cap (3-24/
8
) from the phototube
(3-24/
5
) and insert premounted unit
A
in the
phototube.
•
Align unit in the required position and tighten 3
Allen screws (3-24/
6
).
☞
If focusing is not to be performed
through the viewfinder of the camera,
a focusing eyepiece with photo reticle
MC 2.5x / d = 26 mm (454075-0000-
000, see p. 1-15) must be used.
☞
For detailed information on SLR
cameras please see manual G 42-406
II, "35
mm SLR cameras for
microscopes and stereomicroscopes".
Fig. 3-24
Attachment of SLR camera
(e.g. Contax 167 MT)
Summary of Contents for Axioskop 2 FS plus
Page 1: ...Operating Manual Axioskop 2 FS plus FS MOT Research Microscope...
Page 14: ...INTRODUCTION Axioskop 2 FS plus Carl Zeiss Axioskop 2 FS MOT 0 14 B 40 076 e 02 01...
Page 110: ...OPERATION Axioskop 2 FS plus Carl Zeiss Axioskop 2 FS MOT 3 40 B 40 076 e 02 01...
Page 122: ...ANNEX Axioskop 2 FS plus Carl Zeiss Axioskop 2 FS MOT A 2 B 40 076 e 02 01...
