Zeiss Axio Scope.A1, Operating Manual

Page: 58 / 123

STARTUP
Carl Zeiss Mounting Optional Components Axio Scope.A1
58
M60-2-0007 e 05/08
3.4.4 Mounting the Magnification
Changer
•
If necessary, remove camera with adapter (or
dust protection cover) from the camera port of
the photo tube (
521H521H
Fig. 3-41/ 2 ).
•
Mount the magnification changer (
522H522H
Fig. 3-41/ 1 )
onto the camera port, adjust it and fixate it with
the retainer nut (
523H523H
Fig. 3-41/ 3 ).
•
Mount the camera with the appropriate adapter
onto the camera port of the magnification
changer.
The scanning power for changing the
remagnification modules can be adjusted with the
screw with a white circle on the bottom of the
housing.
3.4.5 Changing the Filters in the
Reflector Module FL P&C
•
Remove the reflector module FL P&C
(
524H524H
Fig. 3-42/ 3 ) from the reflector turret and put it
aside (see also chapter
525H525H
3.1.6).
•
Unscrew the adapter ring (
526H526H
Fig. 3-42/ 1 ) with the
mounting plate included with the tools
(
527H527H
Fig. 3-42/ 6 ).
•
Turn over the reflector module and let the filter
(
528H528H
Fig. 3-42/ 2 or 5 ) drop onto a soft surface.
•
The emission filter is inserted in
529H529H
Fig. 3-42/ 2 , the
excitation filter in
530H530H
Fig. 3-42/ 5. Then fixate with
the adapter rings (
531H531H
Fig. 3-42/ 1 ).
Emission and excitation filters can have a name
and an arrow in the girth. The arrow indicates
which way the filter must be mounted on the
reflector module and should always point inward
(see arrows in
532H532H
Fig. 3-42).
In order to minimize the image offset in multiple fluorescence images, the emission filter may have
another mark to factor in the point angle.
Fig. 3-41 Mounting the magnification
changer
Fig. 3-42 Changing the filters in the reflector
module FL P&C