Zeiss Axio Scope.A1, Operating Manual, Page: 71 / 123

OPERATION
Axio Scope.A1 Illumination and Contrasting Method Carl Zeiss
M60-2-0007 e 05/08
71
(4) Adjusting the vertical stop on the
condenser carrier
•
Loosen the setscrew (
625H625H
Fig. 4-2/ 1 ) on the vertical
stop with the ball-head screwdriver SW 3.
•
Focus the sample with the focusing drive.
•
Close the field diaphragm and adjust the
condenser vertically (
626H626H
Fig. 4-2/ 2 ) until you get a
sharp image.
•
Perform the vertical adjustment on the
condenser by small increments only to avoid
lifting out the sample.
•
Tighten the setscrew (
627H627H
Fig. 4-2/ 1 ) on the vertical
stop.
(5) Adjusting the vertical stop on the
focusing drive
•
Turn the clamping lever (
628H628H
Fig. 4-3/ 1 ) of the stop
towards the pin stop.
•
Move the stage with the aid of the focusing
drive (
629H629H
Fig. 4-3/ 2 ) to the highest position
allowable without risking colliding with object
carrier or objectives.
•
Now press the clamping lever down until the
stop engages again.
Fig. 4-2 Adjusting the vertical stop on the
condenser carrier
Fig. 4-3 Adjusting the vertical stop on the
focusing drive