Zeiss Axio Scope.A1, Operating Manual

Page: 55 / 123

STARTUP
Axio Scope.A1 Switching the Microscope and its Separate Illumination Fixtures on and off Carl Zeiss
M60-2-0007 e 05/08
55
3.2.3 Upper Stand Part for HAL 100/HBO,
FL/HBO, FL-LED
•
Mount the halogen lamp HAL 100 to the stand
(see chapter
492H492H
3.1.15.1).
•
Connect the 3-pin HAL 100 plug to the
separate auxiliary power supply unit
(
493H493H
Fig. 3-37/ 3 ).
•
Connect the power cord of the auxiliary power
supply unit (
494H494H
Fig. 3-37/ 4 ) with an electrical
outlet.
Or
•
Connect the HBO 100 plug to the transformer
HBO 100 W (
495H495H
Fig. 3-38/ 2 ), then connect the
power supply (
496H496H
Fig. 3-38/ 3 ) of the transformer to
an electrical outlet.
Or
•
Connect the external ac adapter of the upper
stand part FL-LED (with integrated LED-
illumination) to an electrical outlet.
3.3 Switching the Microscope and
its Separate Illumination
Fixtures on and off
•
Turn the power switch (
497H497H
Fig. 3-35/ 1 ) of the
microscope with lower stand part for LED or
HAL 50 illumination either on or off.
•
Switch on the halogen lamp for transmitted
light (lower stand part for HAL 100 illumination)
and reflected light (if in use) at its separate
auxiliary power supply unit (
498H498H
Fig. 3-37/ 1 )
accordingly (also refer to the separate operation
manual of the auxiliary power supply unit).
•
Switch on or off the HBO 100 lamp for
overhead fluorescence light (if in use) with the
power switch of the transformer HBO 100 W
(
499H499H
Fig. 3-38/ 1 ).
•
Switch on the LED illumination on the upper
stand part FL-LED directly (
500H500H
Fig. 4-23/ 2 ).
Fig. 3-37 Auxiliary power supply unit
HAL 100 (front and back)
Fig. 3-38 Transformer HBO 100 W
(front and back)