Zeiss Axio Scope.A1, Operating Manual, Page: 30 / 123

STARTUP
Carl Zeiss Mounting the Standard Components Axio Scope.A1
30
M60-2-0007 e 05/08
3.1.2 Mounting the Upper Stand Part on the Stand Column
If you are going to use a microscope stand consisting of an upper stand part and a stand column, please
begin by assembling the upper stand part.
•
Remove the magnetically mounted cover (
287H287H
Fig. 3-2/ 1 ) of the upper stand part by inserting a ball head
screwdriver into the assembly opening in front (
288H288H
Fig. 3-2/ 3 ). Lift the cover.
•
Using the six hexagon socket screws (
289H289H
Fig. 3-2/ 2 ) included in the package, screw the upper stand part
(
290H290H
Fig. 3-2/ 4 ) onto the gear box (
291H291H
Fig. 3-2/ 5 ) of the stand column.
•
Replace the cover.
•
In order to adjust the microscope vertically, loosen both release tractors (
292H292H
Fig. 3-2/ 6 ) on the stand
column and adjust the height (according to the size of the specimen) with the hand wheel (
293H293H
Fig. 3-2/ 7 ).
Then tighten the release tractors again.
Fig. 3-2 Mounting the upper stand part on the stand column