Chromira
66
Removing the Old Encoder Strip
1.
Loosen the two screws holding the left-end of the Encoder Strip, indicated as
“A” in the above drawing (2 total screws).
2.
With the Air-Pressure turned ON, move the head over to your left.
3.
Loosen and remove the two screws (“B”) holding the right end of the Encoder
Strip. This will free both the retainer block and the end of the Strip.
These drawings show views as
seen standing at Take-Up Side of
machine.
A
Encoder Strip Attachment at
Left End of Air-rail.
C
Summary of Contents for CHROMIRA
