ZBE CHROMIRA, User Manual, Page: 34 / 93

Chromira 34
When “Print Alone” is selected the printer will print one print across the
width of the
paper. This selection leads to a greater amount of paper waste.
17- Crop Marks: There are three selections in this function. The first is “No
Crop Marks”. This function prints with no crop marks around the image.
The second selection is “Crop Marks”. This selection will print crop marks
around the image. Each crop mark takes up a ¼ inch. The last of the
selection is “Chromira Trim Marks”. This operates only with the Chromira
Trim. Please see the Chromira Trim manual for direction on its function.
18- Print Data: This Function, when checked, will print a data line with the
image. Please see the section in the Chromira Printer Software on Print
data settings.
19- Color: This button opens up the Color Settings. These settings are
“On-the-Fly” changes, meaning any color, contrast, or saturation
changes will not effect the core file. They are only applied when the
printer is printing the file. Each value is in CC units. There are different
settings that can be made. They are listed as follows:
a. Cyan/Red: A positive value will add cyan to the print. A
negative value will add red to the print.
b. Magenta/Green: A positive value will add magenta to the
print. A negative value will add green to the print.
c. Yellow/Blue: A positive value will add yellow to the print. A
negative value will add blue to the print.
d. Dark/Light: A positive value will add density to the print. A
negative value will decrease the density of the print.
e. Contrast/Flat: A positive value will add contrast to the print. A
negative value will decrease the contrast of the print.
f. Saturation/Less: A positive value will add saturation to the print. A
negative value will decrease the saturation of the print.
20- Exit: Clicking on this button will exit the operator from the submit print
window.