ZBE CHROMIRA, User Manual, Page: 28 / 93

Chromira 28
2- The computer must have at least a Pentium processor and 64 Megs of
RAM. However, a faster processor along with more RAM will allow the
Chromira to print faster.
3- The computer must have Windows 98 2
nd
edition or a more recent
version.
4- The computer must interface with the network and must be able to see
the Chromira Computer.
Loading the program on a computer with older operating systems can
result in compatibility issues and certain errors.
Once it has been established that your computer meets the requirements,
execute the Chromira install shield. Select the Chromira Workstation and
follow the instructions. After installation is complete, a Workstation Icon will
be displayed on the desktop. Double click on this Icon and it will launch the
Workstation program. Now the operator must establish the location of the
Chromira Printer. Located at the top of the Workstation window is a set of
pull down menus. Locate the “printers” selection and select it. Once open,
the Edit Printer window will appear (See Diagram below). Locate the Browse
button and click on it. You must now browse for the Chromira.PR file. The
Chromira.PR file is the Chromira Printer identification. The PR file is located in
the Chromira Printer folder on the root drive (C:) of the Chromira computer.
Once you have located the Chromira.PR file, select it and check it as active.
If you have multiple printers, you must browse for all and then select the one
you want to print to as active. When complete, click the OK button to end
the initial set up. You are now ready to submit prints to the Chromira Printer
via this location.
If your lab has multiple Chromiras, and you have set up the workstation to be
able to print to any of the printers, you may also access the quick printer
selection. This is located under the tool bar of the Workstation main screen.
Just click the down arrow and select the printer you wish to use.