ZBE CHROMIRA, User Manual, Page: 40 / 93

Chromira 40
ZBE has provided the tools for the application of a color management system.
However, we (ZBE) are not Color Management experts. We will provide as
much support as we are capable. However, it may be necessary for you to
consult a color management expert to set up a system.
Chromira Balance
The last program provided with the Chromira is the Balance Program. This program
is very important for balancing the printer for your lab.
Initial Set Up
In order to balance the printer, the operator must first give the location of the
printer to the balance program. This procedure is similar to that of the
workstation browsing for the printer. Click on the browse button located at
the top of the window:
Find the Chromira.PR file and select it. Once this is done, verify that it has been
accepted by looking at the emulsion and material type. The current emulsion
and material type should be displayed.
Setting up the Densitometer
The Chromira software will allow the user to interface with certain
densitometers. Please see appendix for models and series of densitometers
that are compatible with the Chromira. Also listed are the settings for each