Chromira
62
20.
This will return you to the Windows desktop, and the computer will ask
you to reboot.
21.
After re-booting, verify that you can “see” the other computers on
the network. Windows takes up to about 3 minutes for the other
computers in the Workgroup to appear. Network Neighborhood will
appear blank until then.
Simple Troubleshooting
> If no computers appear in the Network Neighborhood, and you know you have more
than one setup according to the procedure outlined here, try “pinging” one, as follows:
Start a Command Prompt (Start Menu, Programs, Command Prompt)
At the command line, type “PING 192.168.0.nnn” replacing the “nnn” with a
number from one of the
other
computers on your network.
The program should respond with “Reply from…” and the IP Address you
typed in.
If you get “Request Timed Out” then the network wiring between the
computers, or the hub, is not functional.
If this works, the hardware (cabling, hub, network cards) is ok on both
computers. This will mean that the problem is in the Network setup.
Summary of Contents for CHROMIRA
