DOC-USR-0272-01
FSDI-1XA User’s Guide
72
“Follow input” = Generate encoder resolution based on capture resolution detected
10.8
The CH2 & CH3 Tabs (Channels 2 & 3)
The FSDI-1XA supports simultaneous encode into multiple different resolutions and bitrates.
Each output
stream can be set using a separate Channel tab. See the CH1 Tab section for detailed descriptions of
available settings on the CH2 and CH3 tab. If these tabs are not present, you can create a them by clicking
on the “+” tab. Only three channels are supported.
The maximum performance for two channels is one 1080p60 plus one 720p60 stream.
CH2 Default:
Parameter
Options (default
in bold)
Description
Encoder Setup
Output
Resolution
320x180 –
1920x1080
(1280x720)
Follow Input
The encode resolution. If this resolution is different from the
capture resolution (1920x1080), resizing will occur.
Video Bitrate
2K – 40M (
2M
)
Textbox for entering video bitrate.
Output Setup
Channel 1 PIP
Enable
True
False
Enables a picture in picture in channel 1 of the same size as the
Output Resolution on the channel 2 tab.
CH3 Defaults:
Parameter
Options (default
in bold)
Description
Encoder Setup
Output
Resolution
320x180 –
1920x1080
(720-480)
Follow Input
The encode resolution. If this resolution is different from the
capture resolution (1920x1080), resizing will occur.
Video Bitrate
2K – 40M (
2M
)
Textbox for entering video bitrate.
10.9
Values Appearing at the Bottom of All Tabs
Parameter
Options (default in
bold italics)
Description
preset
encoder
(any user-defined
profiles)
--- new preset ---
The configuration file selected for use.
encoder
:
Factory default settings
Can also add more profiles by selecting
--- new preset ---
.
Save Button
Click to save preset value to the selected configuration.
