DOC-USR-0272-01
FSDI-1XA User’s Guide
45
Figure 55 System Setup tab configuration
(1)
Select 1 from the
Max fixed profiles
drop down selection.
(2)
Then click on
change
, you then be asked to reboot the system for the changes to take effect.
(3)
The CH1 tab from this point is the designated tab in which ONVIF will work with a camera. To
set the appropriate camera to be used in single profile mode.
Figure 56 Channel 1 Tab configuration
(4)
Go to the
CH1
tab and change the
Video Source
to the desired camera.
(5)
Start the encoding so the change is pushed to the Z3 device.
Figure 57 Save preset option
(6)
Click on
Save
for the
preset
so that this change is present during reboots of the system as
well.
