DOC-USR-0272-01
FSDI-1XA User’s Guide
54
(5) To login as the new user click the logout button in the top right of the web interface. You will be
prompted to login. Login with new credentials.
1.1
Factory Reset
The FSDI-1XA can be reset to its original factory settings using the pinhole reset on the right of the I/O PCB
of the unit.
Figure 70 Pinhole Reset
(2)
Allow the FSDI-1XA to boot completely.
(3)
Press and hold pinhole reset switch until status light flashes yellow
(4)
Power cycle device. Once the boot sequence has completed the FSDI-1XA will return to its original
factory settings.
The FSDI-1XA can also be reset via a USB device at boot:
(1)
Plug a FAT32 formatted USB drive into your PC.
(2)
To do a factory reset create a directory or file named “z3reset”. To only reset the password, create
a directory or file named “z3passreset” instead.
(3)
Eject the drive from your PC and plug into a powered down HE2K-DCK-1X. Power on the encoder.
(4)
When the boot is complete the unit will be running the factory defaults if “z3reset” was used. If
“z3passreset” was used the unit will have the same settings except the password will be disabled.
9.0
DECODE OPTIONS
9.1
PC Configuration for HD HEVC/H.265 Decode
Due to the advanced processing needed to support HEVC/H.265 decoding at HD resolutions, a PC must
meet the following requirements:
▪
Nvidia GEForce GTX960 (desktop) or GTX960M (laptop) graphics card
▪
LAV Filters
4
version 0.63 or higher
4
LAV Filters is an open source program that allows playback of video and audio on a PC without installation of
additional codecs and can be downloaded for free online.
