DOC-USR-0272-01
FSDI-1XA User’s Guide
29
Figure 33 Micro SD connection
(1)
Connect a USB flash drive or other USB storage device to USB on the back of the camera or insert a
micro SD card into the slot on the side of the DCK.
Note
:
The storage device must be formatted in either
FAT32, VFAT, EXT3, or EXT4 format.
(2)
Return to the user interface, and if necessary, click on the
Stop
button in the
Channel Controls
section of the user interface CH1 tab or the
Stop All
button in the lower right corner of the screen of
any tab.
(3)
Verify the
Output Resolution
is set to
Follow Input
to output a HD stream. If a lower resolution
output is desired, select this in the dropdown menu and resizing will occur.
(4)
Select the
Video Codec
you would like to use for your video encoding.
(5)
Under Output Setup, select
TSFILE
from the
Output Format
dropdown menu.
(6)
Click on the
Output Device
field to select your USB storage location. This will automatically
populate if a USB is detected.
(7)
In the
File Prefix
textbox, enter the desired prefix for your .ts file name.
a.
When saved, a number will be automatically generated and added to the end of the file
prefix, starting with zero. If subsequent recordings are made to the same storage device,
existing files with the same prefix will be detected and the new recordings will auto-
increment to the next number.
b.
For example, if the prefix
MOV1_
is provided. This will result in a file entitled MOV1_0.ts on
the storage device. Subsequent recordings will be entitled
MOV1_.ts, MOV1_2.ts
, etc.
c.
The default prefix provided is
MOV1_%F_%T_
which will pull the current date, in
year/month/day format, and time, in 24-hour notation, into the file name.
Note:
By default, a limited selection of video encoding settings are available in the user interface. See Section
8.2, “Advanced Settings Mode”, for more information on accessing additional settings.
(8)
Click on the
Start
button. After a moment, the encoder status will change to
RUNNING
and the fields
above will appear in dark grey. The status LED on the unit will blink green when streaming.
Insert Micro SD
Card into slot
(bottom)
