DOC-USR-0272-01
FSDI-1XA User’s Guide
59
on channel 1. See DOC-USR-0169-0x for more details
(reboot required)
Display Setup
Resolution
AUTO
NTSC
PAL
Selects the desired resolution for Composite pass-
through output.
Source
Primary
Secondary
Selects the desired source for the Composite pass-
through output.
Set Display
Button
Click once the desired selection is made in the
Resolution dropdown menu to make real time
changes.
Device Management
Set Device
Name Button
Sets a custom name for the camera to appear in the
user interface.
New device
Name
Text box to enter desired device name.
Set Password
Button
Sets a password to limit access to the user interface.
New password
Text box to enter new password.
Password again
Text box to re-enter new password.
Must match previous field.
Time Settings
Click this button to access Time configuration options
Enable Time
Service
None,
Network Time Protocol
(NTP)
, IEEE 1588 PTP
Sets desired time service on the unit.
Time Zone
America/Chicago
Allows for selection of desired time zone.
NTP Servers
pool.ntp.org
Address of desired server for NTP.
PTP
Server/Client
Role
Auto
, Client only, Server only
Sets the PTP role; see DOC-USR-0223-0x for details
Enable NTP
True
False
Sets whether Simple Network Time Protocol (NTP) is
enabled.
Time Zone
America/Chicago
Allows for selection of desired time zone.
NTP Servers
(128.138.141.172)
Address of desired server for NTP.
Set
HTTP/HTTPS
Sets HTTP/HTTPS access to the web UI. See DOC-USR-
0164-0x for more information
Set 802.1X
Sets configuration for 802.0x on the wired connection.
See DOC-USR-0161-0x for details.
Configure FPGA*
Configures FPGA config for DCK-XX unit. Z3 ships DCK
units with expected FPGA config, but changes to the
hardware configuration of DCK may require a change
to the FPGA config. Most customers will not need
change this setting.
Configure
ONVIF*
Enable/Disable ONVIF and control number of cameras
to advertise to ONVIF clients.
