DOC-USR-0272-01
FSDI-1XA User’s Guide
60
Configure ONVIF
VMD*
Click this button to set up video motion detect and
image too dark detect ONVIF notifications.
Enable Motion
Detect
TRUE,
FALSE
Enables the Video Motion Detect notification from
ONVIF
Detection
Channel
Channel 1
Sets the channel to use for motion detection
Modify Zone
Checked,
Unchecked
Allows setting of a detection zone within the video.
Sensitivity
1-100 (
1
)
Sets the sensitivity of the video motion detect higher
numbers are more sensitive.
Enable Too Dark
Detect
TRUE,
FALSE
Enables Video Too Dark Tamper detection notification
from ONVIF.
Threshold
1-100 (
85
)
Sets the percent darkness of the image to trigger the
too dark detect. Lower values mean higher sensitivity.
Set Term Server*
Enable/Disable remote terminal server.
Set ZFinder*
Enable/Disable ZFinder support on unit.
Set DDNS
Click this button to set up Dynamic Domain Name
System (DDNS).
Enable DDNS
TRUE,
FALSE
Enable/Disable DDNS.
DDNS Provider
Assorted
Select DDNS service provider from a list of supported
providers
DDNS Username
Username for DDNS service provider.
DDNS Password
Password for DDNS service provider.
DDNS Hostname
DDNS hostname provided by DDNS service provider.
Update device
firmware Button
Access the Software Updater to update the firmware
on your device. An image file of the desired firmware
is needed.
Download
support logs
Button
Extract a set of diagnostic logs that can be provided
to Z3 in the event of an issue to be reported. The
resulting file is saved on the PC with the user
interface open.
Reboot Button
Restarts the unit without the need to disconnect
power.
