DOC-USR-0272-01
FSDI-1XA User’s Guide
12
Set-up tab, set the desired IP settings and select "Save”. The system will need to restart on the desired IP
settings for the update to be retained through a power cycle. See Section 10.10, ZFinder, for more
information.
Note:
If the device appears in red, there is a network error, and network settings will need to be modified in
order to access the user interface.
(8) Click on Open Device. An internet browser window is opened in your default web browser (for best
results, Firefox or Chrome are recommended).
(6)
By default, the system will have automatically started encoding. Click on the CH1 tab for channel
one configuration settings. If the encoder status message in the bottom right corner of the screen
shows
RUNNING
, you will need to click the
stop
or
Stop All
button in order to change any settings.
Figure 7 FSDI-1XA User Interface – CH1 Tab
