DOC-USR-0272-01
FSDI-1XA User’s Guide
31
6.9
Dual Stream and Record
Dual streaming and recording simultaneously is supported in TS mode.
(1)
First you need to go to the Systems Tab and enable Advanced Settings
(2)
Turn off low latency transport stream
(3)
Go to the CH1 tab and Select TS mode
(4)
The AUX file option should appear
(5)
This allows you to stream and also to store CH1 to a file. The same can be done for CH2
Note
:
Dual Stream/Record cannot be supported in low latency mode.
6.10
Microphone Input
(1)
Connect a microphone with a 3.5mm cable output to
MIC
on the back of the camera.
(2)
Return to the user interface, and if necessary, click on the
Stop
button in the
Channel Controls
section of the user interface CH1 tab or the
Stop All
button in the lower right corner of the screen of
any tab.
(3)
Verify
Audio Enable
is set to
True
and set your desired values for
Codec
,
Sample Rate
and
Bit Rate
.
(4)
Select the appropriate option from the
Source
dropdown menu corresponding to your microphone:
a.
MIC Line-In
should be used with non-powered/non-amplified microphones.
b.
MIC
should be used with powered/amplified microphones.
(5)
Set
Audio Enable
to
False
to disable encode of the audio input.
Connect
Microphone
to “MIC”
Figure 35 Microphone Connection
