DOC-USR-0272-01
FSDI-1XA User’s Guide
13
5.2
Thermal Camera Configuration
Go to the System Set-up tab. Use the FPGA option to configure a thermal camera.
Figure 8 FPGA Configuration
(1)
Select Tau2 for Digital video from the Flir® Tau2 or Boson for Boson support
(2)
Select Tamarisk for Digital video from the DRS Tamarisk®
(3)
Select Composite if Analog or NTSC/PAL video from Flir® Tau2, DRS Tamarisk®, or another composite
video output
NOTE:
For thermal camera setting requirements and additional encoder control options refer to the (FV2K, FV4K
and FSDI System Guide).
6.0
STREAMING CONTROL
This section gives step-by-step instructions on setting the FSDI-1XA to output and stream video using each of
the output format options: UDP, RTP, RTSP and RTMP. In addition to the FSDI-1XA, a Windows PC with VLC
media player
1
downloaded or a hardware decoder. . Please see Section 9.0, Decode Options, for more
information on compatible decoders and PC configuration and requirements for H.265/HEVC decode at HD
resolutions.
6.1
Stream UDP
6.1.1
UDP Camera Setup
Note:
Settings in the user interface cannot be changed if the unit is currently encoding.
(1)
If necessary, click on the
Stop
button in the
Channel Controls
section of the user interface CH1 tab
or the
Stop All
button in the lower right corner of the screen of any tab.
(2)
Verify the
Output Resolution
is set to
Follow Input
to output the resolution that the camera is set
to.. If a lower resolution output is desired, select this in the dropdown menu and resizing will occur.
1
VLC is an open source media player from the VideoLAN organization that can be downloaded for free online.
