Z-Wave Alliance CT200-G1, User Manual

Page: 25 / 34

CT200-G1 User Guide
• Battery Report
• Device Reset Locally
• Sensor Multilevel Report
• Thermostat Mode Report
• Thermostat Operating State Report
• Thermostat Setpoint Report
• Fan Mode Report
• Fan State Report
• Configuration Report
These can be accessed via an Association Group Info Command List Get for group 1 (Lifeline).
Basic Command Class is supported by this device.
The Thermostat supports this as a stateful flag. The flag does not affect the thermostat operation.
The Thermostat supports compliant mapping of the Z-Wave BASIC_COMMAND_CLASS to the Ther-
mostat “Energy Saving” and “Comfort Mode” as follow:
• Basic Set (Value = 0x00) = Set Energy Saving Mode
• Basic Set (Value = 0xFF) = Set Comfort Mode
Configuration Command Class is supported by this device.
The Configuration Command Class allows product specific configuration parameters to be changed.
Table 2: Summary of Configuration Parameters
Parameter (8-bit) Name
0x01 Temperature Reporting Threshold
0x02 HVAC Settings
0x03 Utility Lock
0x04 Thermostat Power Source
0x05 Humidity Reporting Threshold
0x06 Auxiliary Heat
0x07 Thermostat Swing
0x08 Thermostat Differential
0x09 Thermostat Recovery Mode
0x0A Temperature Reporting Filter
0x0B
1
0x0C
1
0x0D
1
0x0E
1
0x0F Fan Timer
0x10
1
0x11 Temperature Calibration
0x12 Display Units
Temperature Reporting Threshold
1
Not supported at this time to preserve backwards compatibilty with v11.x.
21