Z-Wave Alliance CT200-G1, User Manual

Page: 33 / 34

CT200-G1 User Guide
Table 29: Temperature Calibration
Name Value
Parameter (8-bit) 0x0D
Size (3-bit) 0x01
Configuration Values (8-bit) Offset
Offset is a signed integer ranging from -6.0 degrees Fahrenheit to +6.0 degrees Fahrenheit.
Table 30: Offset
Value Binary Configuration
0xFA 11111010 -6.0 degree Fahrenheit
0xFB 11111011 -5.0 degree Fahrenheit
0xFC 11111100 -4.0 degree Fahrenheit
0xFD 11111101 -3.0 degree Fahrenheit
0xFE 11111110 -2.0 degree Fahrenheit
0xFF 11111111 -1.0 degree Fahrenheit
0x00 00000000 +0.0 degree Fahrenheit (DEFAULT)
0x01 00000001 +1.0 degree Fahrenheit
0x02 00000010 +2.0 degree Fahrenheit
0x03 00000011 +3.0 degree Fahrenheit
0x04 00000100 +4.0 degree Fahrenheit
0x05 00000101 +5.0 degree Fahrenheit
0x06 00000110 +6.0 degree Fahrenheit
Warning: The offset must be an integer value. Non-integer values, such as 1.5F (0x03),
should not be used.
Display Units
The Display Units parameter specifies the unit of measurement used by the device to display
temperature.
Table 31: Display Units
Name Value
Parameter (8-bit) 0x0E
Size (3-bit) 0x01
Configuration Values (8-bit) Display Units
Configuration values are bit-encoded.
Table 32: Display Units
Value Configuration
0x00 Fahrenheit (DEFAULT)
0x01 Celsius
29