Z-Wave Alliance CT200-G1, User Manual

Page: 26 / 34

CT200-G1 User Guide
The Temperature Reporting Threshold parameter specifies the threshold change in the am-
bient air temperature as detected by the thermostat to generate an usolicited report when
association reporting is enabled.
Table 3: Temperature Reporting Threshhold
Name Value
Parameter (8-bit) 0x01
Size (3-bit) 0x01
Configuration Values (8-bit) Valid Thresholds
Configuration values are bit-encoded. Unsupported values will be ignored.
Table 4: Valid Thresholds
Value Configuration
0x00 Disable Reporting
0x01 0.5 degrees Fahrenheit
0x02 1.0 degrees Fahrenheit (DEFAULT)
0x03 1.5 degrees Fahrenheit
0x04 2.0 degrees Fahrenheit
HVAC Settings (Get Only)
The HVAC Settings parameter contains a read-only description of the HVAC settings of the
thermostat.
Table 5: HVAC Settings
Name Value
Parameter (8-bit) 0x02
Size (3-bit) 0x04
Configuration Values (32-bit)
Byte N = Upper Nibble, Lower Nibble
• Byte 1 = Cooling Type, Heating
Type
• Byte 2 = Heating Fuel, Heat/Aux
Stages
• Byte 3 = A Terminal, Heat Pump
Stages
• Byte 4 = O/B Terminal, Cooling
Stages
The Configuration Values are bit-encoded. Each nibble contains the configuration as pro-
grammed by the user on the thermostat.
22 Chapter 3. Z-Wave Reference