75
extend the life of the machine.
1)
Electrical system: Keep the battery clean and fully charged. Check the battery
cables and connectors, clean the terminals and apply a layer of grease to prevent
rusting.
2)
Lubricant: Use lubricant with suitable viscosity at each joint. Please use the
lubricant recommended by this manual.
3)
Fuel system: Check to see if the fuel is compatible with the cold climate. Change
to a lower viscosity fuel.
4)
Check for water in the fuel system. The cold weather will concentrate water in the
fuel tank. Check the water in the fuel filter every 50 hours of operation. If no
water is present, extend the inspection interval. If there is water, check the fuel
tank.
5)
Cooling system: Before operating the machine in cold weather, check the coolant
and adjust the proper mixing ratio. Use antifreeze suitable for ambient
temperature conditions.
6)
Working device: Before operating the machine, put it in low gear and start it
slowly, then stop the machine and operate the working device for about 10
minutes or until all hydraulic cylinders are working properly.
4.16.2.
Operating in hot weather
To prevent damaging the machine, do as follows.
1)
Ensure that the coolant level in the radiator is normal.
2)
Check the radiator before the hot season starts and replace the coolant if needed.
3)
Remove all dirt from the radiator and engine surface.
4)
Check the fan belt.
5)
Use a lubricant with the right viscosity.
6)
Use the right mixture of coolant in the cooling system.
7)
Check the air filter frequently when operating in extremely poor conditions such
as dusty environment.
