30
2.6.6.
Tip and Skipping Prevention and Countermeasures
WARNING:
1)
When you have to turn on the ramp, only turn in a big circle.
When the machine is to turn to the right, extend the arm and boom to
the left, with the bucket about 30cm from the ground, and lock the
platform. And vice versa.
2)
When the machine skids, press the dozer and bucket to the ground immediately.
3)
When the machine is tipped, the driver should not jump out of the car, but
should hold on to the column of the cab. Jumping is very likely to cause injury.
In the following cases, the machine is
very likely to tip over and must be
avoided.
1
）
The machine is shifted on uneven
ground, tracks are uneven, or more
than half of one track is overhanging.
2
）
When the contact surface of one
track is loose and the other is solid.
3
）
When there is a cavern or a mud pit under one side of the machine.
4
）
When traveling on a slope with a longitudinal slope greater than 25° and
unloading heavy loads in the downhill direction.
5
）
When traveling on a slope with a transverse slope of more than 15° and unloading
heavy loads in the downhill direction.
6
）
On a slope, the two tracks are 90° from the slope, and the platform Swinging is
greater than 90°.
7
）
When working on a slope, the machine makes a sharp turn, and the platform
rotates rapidly or stops suddenly.
8
）
When the machine is swinging downward on the slope at 180°.
9
）
When doing the backward operation (trenching, etc.) and moves on to an uneven
level.
