23
2.6.3.
Safety rules when traveling
1)
When traveling on a flat road, the arm
must be lowered and the boom retracted
to maintain the best position of the
center of gravity, and the distance
between the bottom of the bucket and
the ground should be 40 - 50 cm.
2)
When traveling on rough and uneven
road, use low speed and do not turn suddenly, otherwise machine may tip over
and endanger the operator.
3)
The machine should not travel on
obstacles that lean to one side, which may
cause the machine to tip over.
4)
When traveling or operating, be sure to
maintain a safe distance from people,
buildings or other machines.
5)
When traveling through underpasses, under bridges or under power lines and
other places of limited height, use hand signals to direct. And be careful to
maintain safe distance.
6)
Always lock the platform when traveling up and down slopes.
7)
When passing over bridges or buildings or supports, make sure that they are
sufficient to support the weight of the machine.
8)
When you want to travel on the road, consult the local traffic authorities first and
get their permission before.
2.6.4.
Traveling or working on slopes
Excavators traveling or operating on slopes are extremely dangerous and must be
taken with special care.
1)
It is recommended not to travel up and down long slopes greater than 20 degrees.