![background image](http://html1.mh-extra.com/html/yuchai/yc20sr/yc20sr_operation-manual_3666187041.webp)
32
Before going up and down the slide, be sure to lock the swing lock of the rotary
platform to prevent the platform from rotating.
When going up and down the slide, do not maneuver any handle except the travel
handle.
Load and unload the machine on a firm and flat surface.
Ensure that clearance flags, lights and WARNING signs are in place and visible
to others when driving the machine on the roadway; ensure that the "slow moving
vehicle" sign is visible to vehicles behind you.
Tracked machines may damage road surfaces and have some restrictions when
driving on them, so use a truck to transport the machine when required.
2.6.8.
Downtime maintenance
WARNING: A "DO NOT OPERATE" sign must be attached to the
control handle during any maintenance work on the machine.
The excavator must be stopped on a firm, level surface.
Once the excavator is parked, the bucket must be lowered to the ground, the
engine must be run at idle speed for three minutes, before shutting down the
machine and removing the key.
Release all hydraulic system pressure.
When stopping on a slope as a last resort, provide adequate barriers in the
downward direction of the tracks on both sides.
Make sure to keep a certain distance from other machines when stopping.
When repairing the electrical system or welding, remove the negative battery
cable to prevent the battery from depleting.
To work under the unit, make sure the support is strong and firm, do not work
with only one jack.
Do not lubricate or repair the machine when the engine is running, and do not
allow hands, feet, or clothing to touch the power rotating parts.
If maintenance is to be performed while the engine is running, the machine must